Read the plan
Upload a layout PDF. Counterly traces each countertop run, including islands, splash, and cutouts.
Takeoff and nest
Get square footage by unit type, then see how pieces fit your slabs and an estimated slab count.
Send the quote
Download a cut sheet and quote you can send the same day, ready to review and pass along.
Cut sheet & quoteSample output- Surface
- 3,590.9 sf
- Slabs (est.)
- 91
- Yield (est.)
- 86%
Ready to sendPDF
Sample takeoff output
Maple Ave Kitchen — a multi-unit job, with square footage by unit type and slab nesting.
Countertop takeoff for fabrication shops.
What it is
Countertop takeoff and quoting software for stone fabrication shops.
What it reads
Architectural and kitchen layout drawings. It pulls runs, depths, islands, backsplash and fixture breaks, then returns square footage, finished edge, a slab nesting layout, and a priced quote.
Who it's for
Shops running bridge saws and CNC or waterjet, from a single kitchen to multi-unit and commercial work.
Built for countertop takeoff
Square footage, cutouts, seams, and optimized slab nesting. Ready to quote in minutes.
Upload your drawings and enter the job details, like customer information and slab preferences. Counterly then gives you the square footage, divided by area.
Square footage
Measured area by surface, splash and unit type, computed from the drawing.
Cutouts
Sinks, faucets and fixture breaks flagged on the takeoff so you can check them.
Seams
Nesting follows your seam and kerf preferences, instead of leaving placement as a guess.
Slab nesting
Pieces laid out on your slab sizes, with an estimated slab count and yield.
Accurate takeoffs for every unit type.
Counterly finds all the unit types in your drawings, with their quantities, and draws a takeoff for each unit type. When a number is unclear, it flags a question for you.
Drawings
- Kitchen shop drawings
- Architectural drawings
Projects and spaces
- Multi-unit projects
- Kitchens
- Bathrooms
- Amenity spaces
- Commercial projects
Why shops switch
Faster takeoffs, measured square footage, estimated slab counts and ready-to-send quotes.
1 - Upload drawings and job details
Upload your drawings and enter the job details, like customer information and slab preferences.
You also enter costs and pricing inputs with the job.
2 - Confirm unit types and quantities
2 - Takeoffs
Counterly finds all the unit types, with their quantities, and draws a takeoff for each kitchen type.
You then confirm the unit types and quantities.
3 - Dimensions for each unit type
1 - Square footage
Counterly then gives you the square footage, divided by area.
Each takeoff shows countertop area, splash, cutouts, pieces and finished edge, all read from the drawing. If a number looks off, open the original drawing and check it.
4 - Slab nesting
3 - Slab nesting
When you start a new job, you pick the material from your saved library, slab size included.
Counterly then lays the pieces out on those slabs using your nesting preferences, including where seams go and how much room to leave for the saw kerf.
5 - Final results
You then see the final results, with the takeoff summary and quote.
1 - Upload drawings and job details
Upload your drawings and enter the job details, like customer information and slab preferences.
You also enter costs and pricing inputs with the job.
2 - Confirm unit types and quantities
2 - Takeoffs
Counterly finds all the unit types, with their quantities, and draws a takeoff for each kitchen type.
You then confirm the unit types and quantities.
3 - Dimensions for each unit type
1 - Square footage
Counterly then gives you the square footage, divided by area.
Each takeoff shows countertop area, splash, cutouts, pieces and finished edge, all read from the drawing. If a number looks off, open the original drawing and check it.
4 - Slab nesting
3 - Slab nesting
When you start a new job, you pick the material from your saved library, slab size included.
Counterly then lays the pieces out on those slabs using your nesting preferences, including where seams go and how much room to leave for the saw kerf.
5 - Final results
You then see the final results, with the takeoff summary and quote.
PDF takeoff and slab nesting.
Counterly reads the drawing, traces each countertop run, and shows the dimensions and assumptions used in the takeoff.
From PDF to quote in four steps.
PDF to square footage.
Upload layout PDFs. Counterly returns countertop dimensions, cutouts, and unit types — grouped by the plan labels your estimators already use.
Every piece on every slab.
2D bin-packing on standard slab sizes with yield percentages and waste totals — so material cost is known before you quote.
1 slab for this kitchen · 3 cut pieces
SLAB 1 — 126" × 63"
Pieces spaced ~1.5" apart for saw kerf
Quote-ready output.
Export summaries with square footage, slab counts, edge linear feet, and cutout details.
- Surface33.4 sf
- Finished edge19.7 lf
- Slabs required1
- Yield61%
- Material$420
Manual takeoff vs Counterly
Manual markup versus Counterly — speed, accuracy, repeatability, preparation, and quote-ready output.
Measurement checked against a shop-issued quote. See what matched and what missed →
Talk to your plans.
Fabrication guides
Plain-language guides on countertop takeoff, slab nesting, and quoting from plans.